OpenTTD's known bugs
Last updated:    2010-07-17
Release version: 1.0.3-RC1
------------------------------------------------------------------------


Table of Contents:
------------------
1) About
2) Known bugs in the this stable release
3) Known bugs that will not be solved


1) About:
-- ------
All bugs listed below are marked as known. Please do not submit any bugs
that are the same as these. If you do, do not act surprised, because
we WILL flame you!!

Of course if you have more knowledge about any of these bugs, have more
specifics, we welcome you to report them. React to the given bug indicated
by the number below on http://bugs.openttd.org.


2) Known bugs in the this stable release:
-- --------------------------------------
The following bugs are known to exist in this stable release and
we intend to fix them. Some bugs are known but are not fixable or
fixing them would cause further problems. Those bugs can be found
in the "Known bugs that will not be solved" section.

The bugs in this section all refer to a ticket in our bug tracking system
that you can find at: http://bugs.openttd.org
If the bugs are closed but still listed here it means that the bug is fixed
and that the nightlies and next major release will not have that bug.

- 3938	DirectMusic not properly resetting state causing music to sound wrong
- 3935	Under some circumstances two road vehicles can leave road stop simultaniously
- 3816	Console text does not always fit at 640x480
- 3746	Console output with right-to-left texts in left-to-right texts is not correct
- 3714	Some corrupted savegames can cause crashes
- 3651	[OSX] Crash when selecting full screen
- 3648	[OSX] Crash when selecting music
- 3637	Second highest competing station gets penalised twice
- 3546	Ignoring signals might crash trains
- 3447	[OSX] SDL port is unuseable
- 2782	[OSX] Port hopelessly outdated
- 2585	[OSX] OS' mouse pointer showing
- 2484	[OSX] Cannot enter CJK characters


3) Known bugs that will not be solved:
-- -----------------------------------
This section lists all known bugs that we do not intend to fix and the
reasons why we think that fixing them is infeasible. We might make some
minor improvements that reduce the scope of these bugs, but we will not
be able to completely fix them.

No suitable AI can be found
	If you have no AIs and an AI is started the so-called 'dummy' AI will
	be loaded. This AI does nothing but writing a message on the AI debug
	window and showing a red warning. There are basically two solutions
	for this problem: you must change the settings so no AI is started,
	this is done in the difficulty settings window. The other solution is
	acquiring (downloading) some AI. The easiest way to do this is via
	the "Check Online Content" button in the main (intro) menu or via
	"AI Settings" -> "Select AI" -> "Check Online Content" which is also
	accessed via the main menu.

Clipping problems [FS#119]
	In some cases sprites are not drawn as one would expect. Examples of
	this are aircraft that might be hidden below the runway or trees that
	in some cases are rendered over vehicles.
	The primary cause of this problem is that OpenTTD does not have enough
	data (like a 3D model) to properly determine what needs to be drawn in
	front of what. OpenTTD has bounding boxes but in lots of cases they
	are either too big or too small and then cause problems with what
	needs to be drawn in front of what. Also some visual tricks are used.
	For example trains at 8 pixels high, the catenary needs to be drawn
	above that. When you want to draw bridges on top of that, which are
	only one height level (= 8 pixels) higher, you are getting into some
	big problems.
	We can not change the height levels; it would require us to either
	redraw all vehicle or all landscape graphics. Doing so would mean we
	leave the Transport Tycoon graphics, which in effect means OpenTTD
	will not be a Transport Tycoon clone anymore.

Lost trains ignore (block) exit signals [FS#1473]
	If trains are lost they ignore block exit signals, blocking junctions
	with presignals. This is caused because the path finders cannot tell
	where the train needs to go. As such a random direction is chosen at
	each junction. This causes the trains to occasionally to make choices
	that are unwanted from a player's point of view.
	This will not be fixed because lost trains are in almost all cases a
	network problem, e.g. a train can never reach a specific place. This
	makes the impact of fixing the bug enormously small against the
	amount of work needed to write a system that prevents the lost trains
	from taking the wrong direction.

Vehicle owner of last transfer leg gets paid for all [FS#2427]
	When you make a transfer system that switches vehicle owners. This
	is only possible with 'industry stations', e.g. the oil rig station
	the owner of the vehicle that does the final delivery gets paid for
	the whole trip. It is not shared amongst the different vehicle
	owners that have participated in transporting the cargo.
	This sharing is not done because it would enormously increase the
	memory and CPU usage in big games for something that is happening
	in only one corner case. We think it is not worth the effort until
	sharing of stations is an official feature.

Forbid 90 degree turns does not work for crossing PBS paths [FS#2737]
	When you run a train through itself on a X junction with PBS turned on
	the train will not obey the 'forbid 90 degree turns' setting. This is
	due to the fact that we can not be sure that the setting was turned
	off when the track was reserved, which means that we assume it was
	turned on and that the setting does not hold at the time. We made it
	this way to allow one to change the setting in-game, but it breaks
	slightly when you are running your train through itself. Running a
	train through means that your network is broken and is thus a user
	error which OpenTTD tries to graciously handle.
	Fixing this bug means that we need to record whether this particular
	setting was turned on or off at the time the reservation was made. This
	means adding quite a bit of data to the savegame for solving an issue
	that is basically an user error. We think it is not worth the effort.

Duplicate (station) names after renaming [FS#3204]
	After renaming stations one can create duplicate station names. This
	is done giving a station the same custom name as another station with
	an automatically generated name.
	The major part of this problem is that station names are translatable.
	Meaning that a station is called e.g. '<TOWN> Central' in English and
	'<TOWN> Centraal' in Dutch. This means that in network games the
	renaming of a town could cause the rename to succeed on some clients
	and fail at others. This creates an inconsistent game state that will
	be seen as a 'desync'. Secondly the custom names are intended to fall
	completely outside of the '<TOWN> <name>' naming of stations, so when
	you rename a town all station names are updated accordingly.
	As a result the decision has been made that all custom names are only
	compared to the other custom names in the same class and not compared
	to the automatically generated names.

Extreme CPU usage/hangs when using SDL and PulseAudio [FS#3294]
OpenTTD hangs/freezes when closing, OpenTTD is slow, OpenTTD uses a lot of CPU
	OpenTTD can be extremely slow/use a lot of CPU when the sound is
	played via SDL and then through PulseAudio's ALSA wrapper. Under the
	same configuration OpenTTD, or rather SDL, might hang when exiting
	the game. This problem is seen most in Ubuntu 9.04 and higher.

	This is because recent versions of the PulseAudio sound server are
	configured to use timer-based audio scheduling rather than
	interrupt-based audio scheduling. Configuring PulseAudio to force
	use of interrupt-based scheduling may resolve sound problems for
	some users. Under recent versions of Ubuntu Linux (9.04 and higher)
	this can be accomplished by changing the following line in the
	/etc/pulse/default.pa file:
		load-module module-udev-detect
	to
		load-module module-udev-detect tsched=0
	Note that PulseAudio must be restarted for changes to take effect.
	Older versions of PulseAudio may use the module-hal-detect module
	instead. Adding tsched=0 to the end of that line will have a similar
	effect.

	Another possible solution is selecting the "pulse" backend of SDL
	by either using "SDL_AUDIODRIVER=pulse openttd" at the command
	prompt or installing the 'libsdl1.2debian-pulseaudio' package from
	Ubuntu's Universe repository. For other distributions a similar
	package needs to be installed.

OpenTTD not properly resizing with SDL on X [FS#3305]
	Under some X window managers OpenTTD's window does not properly
	resize. You will either end up with a black bar at the right/bottom
	side of the window or you cannot see the right/bottom of the window,
	e.g you cannot see the status bar. The problem is that OpenTTD does
	not always receive a resize event from SDL making it impossible for
	OpenTTD to know that the window was resized; sometimes moving the
	window will solve the problem.
	Window managers that are known to exhibit this behaviour are KDE's
	and GNOME's. With the XFCE's and LXDE's window managers the resize
	event is sent when the user releases the mouse.

Content files not properly extracted with zlib 1.2.3.5-1.2.4 [FS#3753]
	With zlib 1.2.3.5 up to and including 1.2.4 the function "gzeof",
	which tells when we read the whole file, is broken in such a way
	that OpenTTD thinks it has extracted and written the whole file
	while the last few hundred/thousand bytes are not extracted yet.
	This causes problems for everything that is downloaded from the
	online content system when using one of those versions of zlib.
