# Makefile.in generated by automake 1.10.2 from Makefile.am.
# lib/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




pkgdatadir = $(datadir)/jamvm
pkglibdir = $(libdir)/jamvm
pkgincludedir = $(includedir)/jamvm
#am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-linux-gnu
host_triplet = mips-unknown-linux-gnu
subdir = lib
DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
#RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
RECURSIVE_TARGETS = all-recursive check-recursive \
	install-data-recursive \
	install-exec-recursive \
	install-recursive \
	installcheck-recursive installdirs-recursive \
	uninstall-recursive
DATA = $(noinst_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
#ETAGS = etags
#CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
#ACLOCAL = ${SHELL} /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4/missing --run aclocal-1.10
ALLOCA = 
#AMTAR = ${SHELL} /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4/missing --run tar
#AR = /opt/toolchains/uclibc-crosstools-gcc-4.4.2-1/usr/bin/mips-linux-uclibc-ar
#AUTOCONF = ${SHELL} /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4/missing --run autoconf
#AUTOHEADER = ${SHELL} /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4/missing --run autoheader
#AUTOMAKE = ${SHELL} /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4/missing --run automake-1.10
AWK = gawk
#CC = /opt/toolchains/uclibc-crosstools-gcc-4.4.2-1/usr/bin/mips-linux-uclibc-gcc
#CCAS = /opt/toolchains/uclibc-crosstools-gcc-4.4.2-1/usr/bin/mips-linux-uclibc-gcc
CCAS = $(CC)
CCASDEPMODE = depmode=none
CCASFLAGS = -g -O2
CCDEPMODE = depmode=none
CFLAGS = -g -O2
#CPP = /opt/toolchains/uclibc-crosstools-gcc-4.4.2-1/usr/bin/mips-linux-uclibc-cpp
CPPFLAGS = 
#CXX = /opt/toolchains/uclibc-crosstools-gcc-4.4.2-1/usr/bin/mips-linux-uclibc-g++
#CXXCPP = /opt/toolchains/uclibc-crosstools-gcc-4.4.2-1/usr/bin/mips-linux-uclibc-g++ -E
CXXDEPMODE = depmode=none
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DSYMUTIL = 
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
F77 = 
FFLAGS = 
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
JAVAC = javac
LDFLAGS = 
LIBOBJS = 
LIBS = -ldl -lm -lpthread 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
#MAKEINFO = ${SHELL} /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
NMEDIT = 
OBJEXT = o
PACKAGE = jamvm
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PATH_SEPARATOR = :
#RANLIB = /opt/toolchains/uclibc-crosstools-gcc-4.4.2-1/usr/bin/mips-linux-uclibc-ranlib
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
#STRIP = /opt/toolchains/uclibc-crosstools-gcc-4.4.2-1/usr/bin/mips-linux-uclibc-strip
VERSION = 1.5.4
#abs_builddir = /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4/lib
#abs_srcdir = /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4/lib
#abs_top_builddir = /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4
#abs_top_srcdir = /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4
ac_ct_CC = 
ac_ct_CXX = 
ac_ct_F77 = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
arch = mips
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = mips-unknown-linux-gnu
host_alias = mips-linux
host_cpu = mips
host_os = linux
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
#install_sh = $(SHELL) /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/userspace/gpl/apps/jamvm-1.5.4/install-sh
interp_cflags = 
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
os = linux
pdfdir = ${docdir}
#prefix = /home/yentran/myviews/yentran_laptop_4.06jvm/CommEngine/targets/96368GW_jvm/fs.install/usr/local/jamvm
prefix = $(INSTALL_DIR)/usr/local/jamvm
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias = mips-linux-uclibc
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
use_zip_no = 
use_zip_yes = #
with_classpath_install_dir = /usr/local/classpath
CP_LIB_DIR = ${with_classpath_install_dir}/share/classpath
GLIBJ_ZIP = ${CP_LIB_DIR}/glibj.zip
SUBDIRS = jamvm java gnu sun
EXTRA_DIST = classes.zip README
noinst_DATA = inst_classes.zip
JAVA_FILES = $(srcdir)/jamvm/java/lang/JarLauncher.java \
             $(srcdir)/jamvm/java/lang/VMClassLoaderData.java \
             $(srcdir)/jamvm/ThreadInfoHelper.java \
             $(srcdir)/java/lang/VMRuntime.java \
             $(srcdir)/java/lang/VMClass.java \
             $(srcdir)/java/lang/VMClassLoader.java \
             $(srcdir)/java/lang/VMString.java \
             $(srcdir)/java/lang/VMThread.java \
             $(srcdir)/java/lang/VMThrowable.java \
             $(srcdir)/java/lang/reflect/VMConstructor.java \
             $(srcdir)/java/lang/reflect/VMField.java \
             $(srcdir)/java/lang/reflect/VMMethod.java \
             $(srcdir)/java/security/VMAccessController.java \
             $(srcdir)/gnu/classpath/VMSystemProperties.java \
             $(srcdir)/sun/reflect/annotation/AnnotationInvocationHandler.java \
             $(srcdir)/gnu/classpath/VMStackWalker.java

DISTCLEANFILES = inst_classes.zip
all: all-recursive

#.SUFFIXES:
#$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
#	@for dep in $?; do \
#	  case '$(am__configure_deps)' in \
#	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  lib/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  lib/Makefile
#.PRECIOUS: Makefile
#Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
#	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

#$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
#	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

#$(top_srcdir)/configure: # $(am__configure_deps)
#	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
#$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
#	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
#tags-recursive:
#	list='$(SUBDIRS)'; for subdir in $$list; do \
#	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
#ctags-recursive:
#	list='$(SUBDIRS)'; for subdir in $$list; do \
#	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

#ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
#	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
#	unique=`for i in $$list; do \
#	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
#tags: TAGS

#TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
#		$(TAGS_FILES) $(LISP)
#	tags=; \
#	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
#ctags: CTAGS
#CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
#		$(TAGS_FILES) $(LISP)
#	tags=; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

#GTAGS:
#	here=`$(am__cd) $(top_builddir) && pwd` \
#	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

#distclean-tags:
#	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

#dvi: dvi-recursive

#dvi-am:

#html: html-recursive

#info: info-recursive

#info-am:

install-data-am: install-data-local

#install-dvi: install-dvi-recursive

install-exec-am:

#install-html: install-html-recursive

#install-info: install-info-recursive

#install-man:

#install-pdf: install-pdf-recursive

#install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

#pdf: pdf-recursive

#pdf-am:

#ps: ps-recursive

#ps-am:

uninstall-am: uninstall-local

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-strip

#.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic clean-libtool \
	ctags ctags-recursive distclean distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-data-local install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-local
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
	all all-am check check-am clean clean-generic clean-libtool \
	distclean distclean-generic \
	distclean-libtool distdir \
	install install-am install-data \
	install-data-am install-data-local \
	install-exec install-exec-am \
	install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool \
	uninstall uninstall-am uninstall-local


inst_classes.zip: classes.zip
	ln -fs $< $@

classes.zip: $(JAVA_FILES)
	-mkdir classes
	$(JAVAC) -bootclasspath ${GLIBJ_ZIP} -d classes $(JAVA_FILES)
	cd classes && zip -r ../classes.zip .
	rm -rf classes

install-data-local:
	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)
	# cp -p inst_classes.zip $(DESTDIR)$(pkgdatadir)/classes.zip
	 unzip -o inst_classes.zip -d $(DESTDIR)$(pkgdatadir)/classes
	# $(mkinstalldirs) $(DESTDIR)$(libdir)
	# ln -fs $(GLIBJ_ZIP) $(DESTDIR)$(libdir)/rt.jar

uninstall-local:
	rm -rf $(DESTDIR)$(pkgdatadir)
	rm $(DESTDIR)$(libdir)/rt.jar
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
